Description
Multipole-single actuator type body style, 0.235 inches bushing length, 2.250 inches body length, 2.189 inches body width, 2.340 inches body height.
Detail Specifications
Body Style:
Multipole-single actuator type
Bushing Length:
Between 0.235 inches and 0.250 inches
Body Length:
2.250 inches
Body Height:
Between 2.340 inches and 2.400 inches
Center To Center Distance Between Terminals Parallel To Length:
Between 1.160 inches and 1.220 inches
Center To Center Distance Between Terminals Parallel To Width:
Between 0.720 inches and 0.780 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length:
Between 1.470 inches and 1.530 inches
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width:
Between 0.720 inches and 0.780 inches
Fragility Factor:
Moderately rugged
Mounting Facility Type And Quantity:
6 threaded hole
Storage Type:
General purpose warehouse
Thready Qty Per Inch (tpi):
32
Maximum Continuous Load Current Rating Per Pole:
7.5 amperes ac all locations
Operating Voltage Type And Rating Per Pole In Volts:
120.0 ac all locations
Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps:
6000.0 ac all locations
Circuit Protection Type:
Overcurrent all locations
Trip Release Method:
Thermal all locations
Trip Release Characteristic:
Time delay all locations
Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent:
138.0 all locations
Main Contact Tripping Mechanism Type:
Trip free
Manual Actuator Type And Quantity:
1 push-pull
Actuator Function:
Trip-reset
Actuator Position Designation:
At pole two
Internal Trip Release Configuration:
Series trip all locations
Thread Size:
0.138 inches
Trip Delay Time In Seconds Per Rated Continuous Current:
15.000 at 200 pct all locations and 65.000 at 200 pct all locations
Inclosure Protection Type For Which Designed:
General purpose
Trip Release Ambient Tempurature Rating:
25.0 degrees celsius all locations
Frequency In Hertz:
400.0 all locations
Unpackaged Unit Weight:
3.250 ounces
Test Data Document:
98897-stsyc004 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Thread Series Designator:
Unc
Terminal Type And Quantity:
6 tab w/screw
Item Name:
Motor Circuit Protector
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
